You can stain and seal your wood fence in order to protect it from the weather and also to give it a new look in College Station. For the best protection, you should follow-up the staining by putting on a couple of coats of a high-quality sealer. Before you start staining make sure your wood fence is clean and dry. Also, make sure to use painter’s masking tape to mask off metal hardware such as hinges, latches, and gate handles.
When staining your wood fence it is a good idea to use old newspapers or sheets of plastic to cover the ground underneath your fence. This will keep spills and drips of stain on the plastic or paper and off your cement, grass, or wood area.
How to Protect Yourself During the Fence Stain
In order to protect your hands and eyes from the stain and sealant, wear protective eye-wear and a pair of disposable gloves. Start staining at one end of your wood fence, and work on one section at a time. For the best look and the easiest application, apply the stain on your wood fence in the same direction as the grain runs. Brush the stain on the wood in short, even strokes. This will give you the best-stained look in College Station, TX.
Once you’re done with the first side of your wood fence, you’ll need to move to the second side and stain that part too. When the job is completed, you can remove the painter’s masking tape and allow your wood fence to completely dry.
Most people in College Station do not have enough time to take on the big task of staining and sealing their fence all by themselves. Here at Fence Repair College Station, we will provide professional work at an affordable cost. Give us a call to get a free estimate on your wood fence staining.